LewisportUSA Motorcycle Trials Bars

	JT7 Bars Available in black (shiny or matte) or silver--to order only.
	TryAll "Snaky" Bars Python--NOTE-- these bars come with threaded bar ends included. - -$119.95 Width: 840 mm Rise: 110 mm Back sweep: 10.8° Up sweep: 8.2° 710 gr Viper--NOTE--these bars come with threaded bar ends included. --- $119.95 Width: 840 mm Rise: 95 mm Back sweep: 10.8° Up sweep: 8.2° 710 gr
	Jitsie Tapered Bars The Jitsie Obeez trials bar features a tapered outer wall resulting in a 11/8” (28.8mm) clamping diameter and 7/8 diameter at control ends. The knurled clutch side ensures for a secure grip hold. The anodized alluminium received a special surface treatment for higher resistance. All Jitsie handlebars include a high-density foam pad. Available in 4.5 – 5.0 – 5.5 inch rise. Available in matt black---(-red and titanium color special order.) $125.00
	Renthal complete with pad, $89.95 Dougie or Kuroyama bend 6" rise also available (imported from England)
	Hebo bars, 4 1/2" rise, $89.95--silver $139.95 black Hebo bar pad $14.74 Hebo Tapered Bars (shown) give a more roomy feeling, and are less stiff than braced bars. Conversion clamps are necessary for mounting.

	Grip Air Gun The easy way to replace grips!
	Hebo Clear Grips These come with a cool sticker that goes on the bar/tube underneath the grip and can be read through the clear grip! $24.95
	GRIPS: S3--$14.95 Renthal $14.95 Soft, medium, or hard-(when availible) Hebo $14.95 Montesa $18.95 (each) Domino 2-compound Black only $27.95-(when availible)
	Grip kit This is a new concept. Everything you need in one kit! In the package, you will receive one tube of grip glue, safety wire, and plastic internal bar end plugs. Rugged design with exceptional grip. Designed by world championship trial riders, and reinforced in critical areas. $19.95
	Bar clamps for Montesa.... Adapt the popular tapered bars (Hebo, Domino, Renthal) to your Montesa. $87.50 (clamps only)
	JT7 Bar Clamps for Gas Gas 20mm rise Available in red or blue
	S3 ADJUSTABLE RAISED TAPERED BAR CLAMP SET Available in colors red, blue, or black. Up to three modifications (solutions) at once! Raise the handlebars approximately 20mm, convert to tapered style and have front to rear adjustment. Billet machined from aircraft alloy aluminum and anodized. Includes hardware. With this product, the bottom surface of the handlebar will be 27.5mm above the triple tree. For mounting 28.5 mm base diameter tapered type handlebars (1.12 inches) availible in various colors. Only $109.95 for the complete set with hardware! Closeup 1 Closeup 2
	V-MAR Bar Clamps Several manufacturers are now offering a tapered bar for trials bikes. We offer several different bar mounts to fit these oversize bars. We have the angled Montesa style (below) as well as the vertical mounts for the Gas Gas. All the bar mounts come with new hardware. Black anodized. We also have 10mm and 15mm risers to raise the mounting position of the Gas Gas mounts. The risers come complete with new longer hardware. You can use the risers with your original bar mounts, though they won't match the exact shape of the mount like they do with ours. Montesa mounts $54.95 Gas Gas mounts $49.95 Gas Gas extra tall (+15mm) $54.95
	V-Mar Riser Blocks for Gas Gas Available in 10mm and 15mm $14.95
	V-MAR 4RT Triple Clamp and Bar Mounts For the Montesa, Sherco or Beta ! Black anodized with a fully machined finish, available with or without a set of our fat bar mounts. We have two versions for the Montesa, one that uses the stock Cota 315 style of angled bar mount and our newest design that utilizes our standard vertical mounts. With the vertical mounts you have a choice of the standard or the extra tall bar mounts, or the option of the running either the 10mm or 15mm risers under the bar mounts giving you plenty of options to fine tune the height of your bars. The Montesa clamp will also fit the older Montesa 315 models from 2001-2004 Montesa Tripleclamp w/angled mounts $189.95 Montesa Tripleclamp w/straight mounts $179.95 Beta Tripleclamp w/ fat bar mounts $179.95 Sherco Tripleclamp w/ fat bar mounts $179.95 Montesa Tripleclamp, angled type $149.95 Montesa Tripleclamp, vertical type $149.95 Beta Tripleclamp $149.95 Sherco Tripleclamp $149.95
	Jitsie Clutch Lever Adjuster Replaces the small black bolt with spring that comes on a standard bike with an AJP clutch master cylinder. This CNC machined piece allows you to adjust the distance between the lever and the grip so you can set it up just the way you like it. Available in black, blue or red.--$24.95 each
	Lever Adjuster Screws Fit the Grimeca master cylinders on the Beta Rev3. These screws allow you to adjust the distance between the lever and the grip so you can set like you want it without having to use any tools. Blue/Black/Red or Gold--$24.95
	Jitsie Front Brake Adjuster Replaces the light switch that comes on a standard bike. This CNC machined piece allows you to adjust the distance between the lever and the throttle so you can set it up just the way you like it. Available in grey, black, blue or red--$24.95
	JT7 Master Cylinder Covers Carbon Fiber !
	Jitsie Master Cylinder Covers Available for the small or large AJP master cylinder, anodized in either in blue or red, with the Jitsie logo printed on top. $26.95 each
	V-MAR Master Cylinder Caps Now with logos! Replace your stock plastic brake and clutch resovoir caps with our beautiful and strong aluminum caps. Two sizes are avail to fit the larger 54mm long AJP master cylinders, or the newer, smaller 42mm master cylinders. CNC machined from 6061 T6 aluminum and black anodized. The 54mm caps feature the V-Mar Racing logo, the Montesa logo, or the Sherco logo. The smaller cap is available with either the LewisportUSA or Gas Gas logo. V-Mar's application chart Each $26.95
	Bar Ends: Quality aluminum, $29.95 per pair Click for larger image
	Grip Wire $8.95 Safety Wire Pliers MSR, $25.95
	Kill Buttons Push-button type $24.95
	Jitsie Lever Bushings The most annoying thing with levers is that when you crash the plastic bushes get damaged and cause the lever to move up and down. These Jitsie lever bushes are made of nylon and are more resistant to crashes and get you back that great feeling of a new lever without actually buying one. Fits all AJP levers. $1.50 pair
	Raceline Lever Savers These tiny teflon strips help to keep your levers from bending or breaking during a crash. Put them under your master cylinders, tighten them and you're done. When (if?) you crash, the master cylinder will be able to move slightly so the levers don't take all the force. Sold per 2.-----$3.50
	Standard Levers:--AJP Levers, full size or short. Shorty levers are $27.95 for most bikes
	JT7 Brake Lever for AJP cylinders Easily adjustable!
	Raceline Cast Lever:---BEST BUY!! Only $15.00 each! All clutch /brake levers come with two holes so they fit both the small and big AJP master cylinders. Available in one medium length.
	Raceline Beta Rev3 Levers --BEST BUY!! For the Grimeca master cylinders. These budget levers are the perfect replacement ones and offer excellent value for money. Available for Beta Rev3 bikes from 05-07.
	Apico Lever: Apico levers are manufactured from cold forged aluminium for maximum strength and offer legendary strength against impact. They bend rather than break! All clutch levers come with two holes so they fit both the small and big AJP master cylinders. Available in short or long version. Gold colour finish. $29.95 each
	Lever Pins Replaces the front brake light switch. Allows adjustment of the lever position. $6.95
	Throttle assemblies: Domino throttles (complete) $28.95 (White tube is faster throttle, black tube is slower) Caps $3.95 Rollers $3.95 Aluminum Domino assemblies available (please call)